These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

submaster intensities programmed to midi fader , response is slow

Questions and discussions regarding FreeStyler Software.
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Post Reply
mousegr8house
Knows how to turn Lights ON
Posts: 6
Joined: March 10th, 2014, 8:51 pm
FreeStyler Version: 3
I Use FreeStyler for: DJ

submaster intensities programmed to midi fader , response is slow

Post by mousegr8house »

Hi All

i have setup the first three submasters to control the dimming of my martin CX4
i midi mapped 1 fader to each intensity slider.
also mapped 1 fader to the master intensity.

the intensity faders in the submasters are not responsive i experience lag when going from 0% to 100%.
both in real life and in the 3d view.

while the master intensity is responding as with an analog table .

i have ruled out that the fault is in my midi controller.

i think there must be some small setting i have overlooked.

i am using version 3.6.38 , never updated to a new one because it was working flawless until i tried the above scenario

id love to hear your thoughts guys , been searching and trying to solve it all day without succes.

best regards maurice


mousegr8house
Knows how to turn Lights ON
Posts: 6
Joined: March 10th, 2014, 8:51 pm
FreeStyler Version: 3
I Use FreeStyler for: DJ

Re: submaster intensities programmed to midi fader , response is slow

Post by mousegr8house »

SOLVED

THE CUE WINDOW WAS IN LOOP MODE
MAKING IT IMPOSSIBLE TO CONTROL ALL 3 FADERS/ CUES SIMULTANIOUSLY.
Post Reply

Return to “FreeStyler Software”