These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Problem with laser and freestyler DMX

Questions and discussions regarding FreeStyler Software.
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Post Reply
Boone
Starting to get to grips with FreeStyler
Posts: 29
Joined: August 22nd, 2007, 9:08 pm
FreeStyler Version: 2.96g

Problem with laser and freestyler DMX

Post by Boone »

Hello,

I installed freestyler dmx 3.6.45, but I have a laser LAS148RGB form ibiza light that al the times twinkle ...
With the earlyer versions of freestyler i don't have that problem, and i can controll my laser very good.
I use the velleman K8xxx dmx dongle.

I was looking for a solution, and what i found is when in freestyler setup, where you can choose your dongle, that when i cklick on reset output of my dongle, the problem is gone ...

Somebody that can tell me more what this problem can be pelase ?

Thanks !


Boone
Starting to get to grips with FreeStyler
Posts: 29
Joined: August 22nd, 2007, 9:08 pm
FreeStyler Version: 2.96g

Re: Problem with laser and freestyler DMX

Post by Boone »

Hello,

I did a test last night with version 3.6.43 and there is also the problem.
Also did a test with version 3.5.5 and there is no problem.

The thing that I can see is that the led on my velleman pinks faster with version 3.5.5 than in version 3.6.43.
So is there something that is slower now in the newer versions ?

Also when i reset output, then the laser is working, but my moving heads doesn't react anymore ...

Hope somebody can tell me more about this ...

Thanks !
Boone
Starting to get to grips with FreeStyler
Posts: 29
Joined: August 22nd, 2007, 9:08 pm
FreeStyler Version: 2.96g

Re: Problem with laser and freestyler DMX

Post by Boone »

Hi, and one's again a test on another PC with version 3.6.45.

I create a new location with my laser into it (only one fixture), and that works great.
Then, i add some fixtures, and the laser sometimes twinkles ...
When I add more fixtures, so all that i need, then I have the laser ho twinkles a lot .

So how more device in the setup, then the twinkeling is more.
So maybe someting wrong with timing ?

What can I do please ?
User avatar
buttza
FS is my life
Posts: 351
Joined: January 7th, 2010, 2:14 pm
FreeStyler Version: 3.6.4
I Use FreeStyler for: Stage Show
Twitter: twitter.com/@buttza

Re: Problem with laser and freestyler DMX

Post by buttza »

Hi There,

Please check the driver of the DMX interface. Reinstall the driver. (Make sure the device is not plugged in when you reinstall the driver.)

Try a different refresh rate or try a different interface.

It sounds like an issue with the interface or it's settings.

Thanks.
Post Reply

Return to “FreeStyler Software”