Hi.. first of all sorry for my english..
I've tried to set up 2 moving heads (stairville mh-x25)
with freestyler through a usb/dmx interface (usb-dmx512)..
I've got a stairville lighting mixer too.
At this moment nothing happens when I try any command on software..
Thanks!!!
Anyone can help me? I'm a very novice!!! Topic is solved
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
-
- Knows how to turn Lights ON
- Posts: 4
- Joined: November 29th, 2014, 8:32 am
- FreeStyler Version: 3
-
- FS is my life
- Posts: 772
- Joined: July 11th, 2007, 8:39 pm
- FreeStyler Version: 4.01
- I Use FreeStyler for: Nightclub Lighting
- Twitter: twitter.com/
- Contact:
Re: Anyone can help me? I'm a very novice!!!
1) is your USB to DMX device connected and recognized
2) Hook up 1 fixture on channel 1 and use it to make sure all is functioning correctly before adding additional fixtures
2) Hook up 1 fixture on channel 1 and use it to make sure all is functioning correctly before adding additional fixtures
-
- Knows how to turn Lights ON
- Posts: 4
- Joined: November 29th, 2014, 8:32 am
- FreeStyler Version: 3
Re: Anyone can help me? I'm a very novice!!!
I use Win 8.1 and at opening freestyler
appear the message "DHC_OPEN - DHE_ERROR_NOTOPEN"..
This is my doubt
appear the message "DHC_OPEN - DHE_ERROR_NOTOPEN"..
This is my doubt
-
- FS is my life
- Posts: 772
- Joined: July 11th, 2007, 8:39 pm
- FreeStyler Version: 4.01
- I Use FreeStyler for: Nightclub Lighting
- Twitter: twitter.com/
- Contact:
Re: Anyone can help me? I'm a very novice!!!
Not sure what dongle that is or what the problem is but until you get rid of that error nothing will work. Make sure you have the correct dongle selected and that alll drivers are correct
-
- Knows how to turn Lights ON
- Posts: 4
- Joined: November 29th, 2014, 8:32 am
- FreeStyler Version: 3
Re: Anyone can help me? I'm a very novice!!!
Thanks a lot! I've tried to re-install correct driver and a software to test it.. it seems all works.
I think the problem is when I'm looking for the interface name on Freestyler/setup. I don't find the same name (KMTronic USB DMX512).
I think the problem is when I'm looking for the interface name on Freestyler/setup. I don't find the same name (KMTronic USB DMX512).
-
- FS is my life
- Posts: 772
- Joined: July 11th, 2007, 8:39 pm
- FreeStyler Version: 4.01
- I Use FreeStyler for: Nightclub Lighting
- Twitter: twitter.com/
- Contact:
Re: Anyone can help me? I'm a very novice!!!
Either that device is not supported by Freestyler or it is listed under a different name. Until you straighten this out nothing will work. I would suggest getting an Enttec dongle and be done with your problems
-
- Knows how to turn Lights ON
- Posts: 4
- Joined: November 29th, 2014, 8:32 am
- FreeStyler Version: 3
Re: Anyone can help me? I'm a very novice!!!
Thanks Partyman! I think now is all right!
When I was looking for info about my device, i've seen this:
"Run FreeStyler and in Setup>FreeStyler Setup choose "Enttec open DMX"
Thanks a lot for your kindness and hope to improve in lighting..
When I was looking for info about my device, i've seen this:
"Run FreeStyler and in Setup>FreeStyler Setup choose "Enttec open DMX"
Thanks a lot for your kindness and hope to improve in lighting..