Hi
Is it possible to use an EnTTec Open DMX USB connected to the router USB port and send the data wireless????
Many thanks from Portugal!
Using Router USB Port
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
-
peixotolopes
- Knows how to turn Lights ON
- Posts: 2
- Joined: July 17th, 2014, 2:22 am
- FreeStyler Version: 3.5.6
- I Use FreeStyler for: Stage Show
-
A3aanKeij
- Starting to get to grips with FreeStyler
- Posts: 21
- Joined: September 7th, 2015, 8:12 am
Re: Using Router USB Port
Why not try?
Verzonden vanaf mijn iPhone met Tapatalk
Verzonden vanaf mijn iPhone met Tapatalk
-
FuturoMan
- Knows how to turn Lights ON
- Posts: 1
- Joined: February 26th, 2016, 8:52 pm
Re: Using Router USB Port
I was wondering the same thing. I really enjoy using TouchUI2 in windows and would like to be able to walk the room.
Would this work?
http://www.newegg.com/Product/Product.a ... -_-Product
Would this work?
http://www.newegg.com/Product/Product.a ... -_-Product
-
buttza
- FS is my life
- Posts: 351
- Joined: January 7th, 2010, 2:14 pm
- FreeStyler Version: 3.6.4
- I Use FreeStyler for: Stage Show
- Twitter: twitter.com/@buttza
Re: Using Router USB Port
I doubt the unit would be controllable from a router as the router would have no real driver for it. How would you connect to the USB unit from your computer? I doubt it would show up as an available device. You would need you buy a eDMX with Artnet available for that. This way the lighting rig connected would be available to be accessed by any control device that has it configured in the available interfaces.