DMXIS interface with Freestyler
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
-
- Just started using FS
- Posts: 11
- Joined: May 6th, 2010, 1:55 am
- I Use FreeStyler for: Church
DMXIS interface with Freestyler
Considering the use of Freestyler for lighting a live band. Was looking at Enttec's Pro hardware interface, when I saw that they have anew piece of hardware out (bundled with their DMXIS software product). Has anyone successfully used the new Enttec hardware interface with Freestyler? Please let me know. Thanks.
-
- Can now teach FS to others (Hopefully!)
- Posts: 86
- Joined: May 2nd, 2010, 9:15 am
- FreeStyler Version: 3.3.2
- I Use FreeStyler for: Where do I start?
Re: DMXIS interface with Freestyler
DMXIS is by a UK company called db audioware limited. Enttec designed the interface and are the distributors outside the UK. It might be based on the Enttec Pro interface but cannot be sure. Maybe Raph the developer of FreeStyler could find out or even let us know if FreeStyler will work with that interface.goldtop wrote:Considering the use of Freestyler for lighting a live band. Was looking at Enttec's Pro hardware interface, when I saw that they have anew piece of hardware out (bundled with their DMXIS software product). Has anyone successfully used the new Enttec hardware interface with Freestyler? Please let me know. Thanks.
It is an interface and software I have been looking at for when I cannot do the lights for the band and/or the venue does not warrant a full lighting rig, so the band can control it themselves.
- djSupport
- Hosts the Freestyler Forum and is an Admin!
- Posts: 1901
- Joined: July 9th, 2007, 6:57 pm
- FreeStyler Version: Forum la
- I Use FreeStyler for: Just for the Fun of it.
- Contact:
Re: DMXIS interface with Freestyler
Heather Trott, You Babe! I Drive a Dacia Duster and Explore! Check it out
-
- Just started using FS
- Posts: 11
- Joined: May 6th, 2010, 1:55 am
- I Use FreeStyler for: Church
Re: DMXIS interface with Freestyler
Poke.
Anybody else know? I like Freestyler, and I think that's the way I want to handle our light show.
Preference would be to use the latest ENTTEC device, because its going to incorporate whatever lessons were learned developing the last one, and it also allows me DMXIS as a backup plan.
Thanks for whatever help you may offer.
Anybody else know? I like Freestyler, and I think that's the way I want to handle our light show.
Preference would be to use the latest ENTTEC device, because its going to incorporate whatever lessons were learned developing the last one, and it also allows me DMXIS as a backup plan.
Thanks for whatever help you may offer.
- LJ_krede.dk
- Moderator
- Posts: 1028
- Joined: October 29th, 2007, 8:01 pm
- FreeStyler Version: 3.3.7
- I Use FreeStyler for: Where do I start?
Re: DMXIS interface with Freestyler
[freestylerdev][/freestylerdev]jonny b good wrote:Maybe Raph the developer of FreeStyler could find out or even let us know if FreeStyler will work with that interface.
/LJ_krede.dk
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report
-
- Just started using FS
- Posts: 11
- Joined: May 6th, 2010, 1:55 am
- I Use FreeStyler for: Church
Re: DMXIS interface with Freestyler
OK... where do Ifind Raph? I'm new to the forum and new to Freestyler. Is there a special page I have to post to in order to get his/her attention?
Please let me know. Thanks.
Please let me know. Thanks.
- djSupport
- Hosts the Freestyler Forum and is an Admin!
- Posts: 1901
- Joined: July 9th, 2007, 6:57 pm
- FreeStyler Version: Forum la
- I Use FreeStyler for: Just for the Fun of it.
- Contact:
Re: DMXIS interface with Freestyler
Goldtop fill out the form above it will send him an email!
Heather Trott, You Babe! I Drive a Dacia Duster and Explore! Check it out
-
- Just started using FS
- Posts: 11
- Joined: May 6th, 2010, 1:55 am
- I Use FreeStyler for: Church
Re: DMXIS interface with Freestyler
Done. Thanks for pointing that out.
-
- FreeStyler Developer
- Posts: 80
- Joined: July 10th, 2007, 7:16 am
- FreeStyler Version: 3.2.1
- I Use FreeStyler for: Stage Show
- Contact:
Re: DMXIS interface with Freestyler
It should be based on the Enttec Pro, but I can't guarantee that it will work.
Raphaël
FreeStyler support & development
FreeStyler support & development
-
- Knows how to turn Lights ON
- Posts: 1
- Joined: October 22nd, 2013, 1:25 am
- FreeStyler Version: 3.5.4
- I Use FreeStyler for: DJ
Re: DMXIS interface with Freestyler
Hello;
I can confirm that it does work with the DMXis interface. It found it with no issues and seems to work correctly.
Joe
I can confirm that it does work with the DMXis interface. It found it with no issues and seems to work correctly.
Joe
-
- Knows how to turn Lights ON
- Posts: 1
- Joined: January 12th, 2015, 6:26 am
- FreeStyler Version: 3.5.8
- I Use FreeStyler for: Nightclub Lighting
Re: DMXIS interface with Freestyler
Can I ask, someone who has had success setting up their DMXIS on freestyler to screen shot the setup screen, the only setting it seems to take is when I have it in Open DMX but then it doesn't send out any signal, an other interface and it says Open Failed. Please help.
-
- Knows how to turn Lights ON
- Posts: 4
- Joined: January 8th, 2016, 2:36 am
- FreeStyler Version: 3
- I Use FreeStyler for: DJ
Re: DMXIS interface with Freestyler
interested in this as well. A friend bought the DMXIS but their software is way poor and need to use it with Freestyler.
Thanks
Thanks