These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Freestyler no artnet output

Questions and discussions regarding FreeStyler Software.
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Post Reply
spotlight
Knows how to turn Lights ON
Posts: 6
Joined: January 27th, 2009, 11:01 pm
FreeStyler Version: 3.0.1

Freestyler no artnet output

Post by spotlight »

Hello,

I am new to Freestyler so maybe my problem is trivial but annyway.

I am trying to set up Freestyler to run on Art-Net interface, but it does not seem to work.
I have my laptop connected to a network router and my nic's IP address is 2.0.0.1 subnet mask: 255.0.0.0
I have chosen the Art-Net interface with universe 0 in the Freestyler setup.
I use a 6-bar of PAR64's starting at dmx address 1.
When I open the Art-Net to DMX tool, It says:
Art-Net 2.x.x.x BCAST 2.255.255.255
Art-Net node started...

But when I open the show output dialog, the values stay at zero.
When I open the edit/Show Output I get a window with 6 output values that are responding to the sliders on the right of Freestyler, but the Art-Net outputs remain at zero.

I think my network setup is ok, because when I start Dmx Workshop (from Artistic License) I can change the output values in Art-net to DMX tool perfectly.
It seems reestyler is not sending out any Art-Net packet.
I have checked the blackout and freeze settings and also the master (whitch is at 100%).

Does anyone know what I am doing wrong?

thanks.


Tom
Commited FS Forum helper
Posts: 115
Joined: July 11th, 2007, 8:29 pm
FreeStyler Version: 2.95f

Re: Freestyler no artnet output

Post by Tom »

Have you got the fixtures patched correctly in freestyler?
spotlight
Knows how to turn Lights ON
Posts: 6
Joined: January 27th, 2009, 11:01 pm
FreeStyler Version: 3.0.1

Re: Freestyler no artnet output

Post by spotlight »

I guess I have patched my fixtures right.

I re checked this and it looks all correct to me:
I have chosen the Art-Net interface with universe 0 in the Freestyler setup.
I use a 6-bar of PAR64's starting at dmx address 1.

Also when I change the dmx address for the pars, that changes also in the edit/show output window and the dmx values shown in that window change with the sliders.
In the Art-Net tool (which looks at 1 dmx universe being universe 0) I can see the 512 dmx values, but they remain all at zero.

It seems to me that it must be a general setting.

grtz
Tom0101
Just started using FS
Posts: 12
Joined: March 7th, 2008, 10:36 pm
FreeStyler Version: 3.0.1

Re: Freestyler no artnet output

Post by Tom0101 »

i have the same problem, but also no solution...
lj_raph
FreeStyler Developer
Posts: 80
Joined: July 10th, 2007, 7:16 am
FreeStyler Version: 3.2.1
I Use FreeStyler for: Stage Show
Contact:

Re: Freestyler no artnet output

Post by lj_raph »

Hi All

Is the Windows firewall still active? if so disable it.

Raph
Raphaël
FreeStyler support & development
spotlight
Knows how to turn Lights ON
Posts: 6
Joined: January 27th, 2009, 11:01 pm
FreeStyler Version: 3.0.1

Re: Freestyler no artnet output

Post by spotlight »

Hello Raph,

I tought of that as well, so I shut down my windows firewall, but that had no effect.

grtz.
lj_raph
FreeStyler Developer
Posts: 80
Joined: July 10th, 2007, 7:16 am
FreeStyler Version: 3.2.1
I Use FreeStyler for: Stage Show
Contact:

Re: Freestyler no artnet output

Post by lj_raph »

Do you have multiple network interfaces?
If so try to disable the others and restart your computer and try again.
Raphaël
FreeStyler support & development
spotlight
Knows how to turn Lights ON
Posts: 6
Joined: January 27th, 2009, 11:01 pm
FreeStyler Version: 3.0.1

Re: Freestyler no artnet output

Post by spotlight »

Hi all,

I have did som more tries and used an ethernet packet sniffer and got it (partionally) working.
I figured out that when you start FS (with the Art-net interface selected) it starts sending out Art-Net packets.
If you then start the Art-Net to DMX tool, the latter gives an error saying: Address 0 in use and when you click ok, it says: Interface error

If you do it the other way around and start up the Art-Net to DMX tool first, that one starts up ok.
If you then start up FS, the latter just does not send anny packet at all.
There is no error message at all.

I have it all running on one laptop (win xp) with 2 network interfaces: one wireless (that connects to my wireless router at a local ip address) and one wired, which I also connected to my router and gave a fiwed ip address of 2.0.0.1. (although it did the same with an ethernet loopback connector)
I have the windows firewall running (turning it on or off did not change anything in the above behavior)
Disabling my wireless connection also did not change the above behavior.
Now I am wondering could it be that the Art-Net tool must be on a different pc? I have not yet tried this, since right now I only have 1 pc (expecting to get one in a couple of months)

I also tried anothe Art-Net listener being the Luminex Wygalizer (whitch is probably not as strict) that interfaces with Wysiwyg visualization software and this works perfectly providing I start FS first and than the Wygalizer. This keeps working even with the windows firewall and the wireless connection active and a loopback connector connected to the wired nic. It even works with the wired nic disabled and the ip address of the wireless set to 2.0.0.1

hope this info helps

grtz
mannieschumpert
Knows how to turn Lights ON
Posts: 1
Joined: August 10th, 2009, 9:04 pm
Twitter: twitter.com/

Re: Freestyler no artnet output

Post by mannieschumpert »

Was this issue resolved?

I've got an Enttec ODE which I can't communicate with via Freestyler.

The ODE is addressed as 2.0.0.2, and is "seen" by Enntec's Node Management Utility, and can be controlled via Artistic Licence's DMX Workshop or Enttec's LightFactory, so the problem is clearly within Freestyler.

It seems the only settings to change in Freestyler are in the "Interface setup", which doesn't give any options other than selecting Enttec ODE or ArtNet. Are there any more specific, user-tweakable network settings hidden somewhere?
rolfmeurer
Knows how to turn Lights ON
Posts: 2
Joined: May 28th, 2017, 3:15 am
FreeStyler Version: 3.6.0
I Use FreeStyler for: Stage Show

Re: Freestyler no artnet output

Post by rolfmeurer »

same Problem for me, Fresstyler 1024 has many bugs using ArtNet.
solution for me is using Frestyler 512 all ArtNet universes are working properly with the 512 older Version. the new Version 1024 can't send on ArtNet Universe > 3 if the 2nd Univers is > 1 nothing works at all. IT'S a shame there is no wqy to disable the 2nd Universe Feature to get the new Version working. It was a hard part to find the old Version but I got it and it works perfectly
lj_raph
FreeStyler Developer
Posts: 80
Joined: July 10th, 2007, 7:16 am
FreeStyler Version: 3.2.1
I Use FreeStyler for: Stage Show
Contact:

Re: Freestyler no artnet output

Post by lj_raph »

Indeed, there is a bug in the Art-Net module that gives some issues when selecting other universes.
A new beta is available for you to test. Send me an email freestylersupport"at"telenet.be
Raphaël
FreeStyler support & development
User avatar
buttza
FS is my life
Posts: 351
Joined: January 7th, 2010, 2:14 pm
FreeStyler Version: 3.6.4
I Use FreeStyler for: Stage Show
Twitter: twitter.com/@buttza

Re: Freestyler no artnet output

Post by buttza »

Thanks Raph
der-neue
Knows how to turn Lights ON
Posts: 1
Joined: March 19th, 2021, 10:36 pm
FreeStyler Version: 3.6.51
I Use FreeStyler for: Stage Show

Re: Freestyler no artnet output

Post by der-neue »

Hello

I have no Artnet Output.

IP adress is 192.168.1.1

in DMXcontroll the Artnet to dmx is OK

Please Help

Uwe Herrmann
Post Reply

Return to “FreeStyler Software”