Page 1 of 1

Need a little help with TouchOSC button behaviour

Posted: October 23rd, 2018, 2:18 pm
by DreNL
Hello Guys,

Hope someone can help me with button behaviour in TouchOSC, especially the Blackout and Freeze button. What happens is that the buttons do react and feedback from FS is also visible in the tablet, but it doesn't respond directly once turned on. I need to press 2-3 times the button before Blackout or Freeze turn off. Weird behaviour.

I have the button setup on channel 16, number 61 and values 0-127. I have tested other layouts and these work, while i do have the same settings.

Help appreciated.

Andre

Re: Need a little help with TouchOSC button behaviour

Posted: November 2nd, 2018, 9:24 pm
by djSupport
Have you reported it as a potential FS Bug?

Re: Need a little help with TouchOSC button behaviour

Posted: November 3rd, 2018, 6:43 am
by DreNL
No because i tested other layouts and they are working. Stupid thing is, i put the settings all like that layout and with me it gets this behaviour.

Re: Need a little help with TouchOSC button behaviour

Posted: November 3rd, 2018, 8:57 am
by djSupport
Hmmm do you think it's the touchOSC Developers problem?

Re: Need a little help with TouchOSC button behaviour

Posted: November 3rd, 2018, 9:24 am
by DreNL
Maybe. I have had contact with him already about posting the manual, so i will reach out to him maybe this week and see if he has a solution.

Re: Need a little help with TouchOSC button behaviour

Posted: November 3rd, 2018, 11:41 am
by djSupport
Keep us updated

Re: Need a little help with TouchOSC button behaviour

Posted: November 5th, 2018, 9:47 pm
by DreNL
Have contacted Hexler to see if this is a behaviour from TouchOSC. I have tested the other way around and when Blackout and Freeze are activated in FS the buttons perfecly light up. Also the other way around works perfectly. So it seems a problem in button setup. Hope Hexler will reply soon, but it took about 2 weeks before answering my mail last time.

Re: Need a little help with TouchOSC button behaviour

Posted: November 5th, 2018, 9:48 pm
by DreNL
Have contacted Hexler to see if this is a behaviour from TouchOSC. I have tested the other way around and when Blackout and Freeze are activated in FS the buttons perfecly light up. Also the other way around works perfectly. So it seems a problem in button setup. Hope Hexler will reply soon, but it took about 2 weeks before answering my mail last time.

Re: Need a little help with TouchOSC button behaviour

Posted: November 6th, 2018, 6:29 am
by djSupport
Cool

Re: Need a little help with TouchOSC button behaviour

Posted: November 7th, 2018, 9:03 pm
by DreNL
I lost it now. In FS the settings are 0 off and 127 on. But I found out when i use a toggle button the Blackout and Freeze only react on 127 and not on 0. This is why I need to press 3 times.

tap 1 is sending 127 (on)
tap 2 is sending 0 (nothing)
tap 3 is sending 127 (off)

I have no idea. Would be nice if someone who is using TouchOSC could explain me the button actions and when is going wrong here.

Re: Need a little help with TouchOSC button behaviour

Posted: November 7th, 2018, 9:15 pm
by djSupport
Are you sure it's not an FS problem?

Re: Need a little help with TouchOSC button behaviour

Posted: November 20th, 2018, 11:46 pm
by DreNL
No answer from Hexler and no answer from Raphael. So I am at a standstill at the moment.

Re: Need a little help with TouchOSC button behaviour

Posted: November 22nd, 2018, 9:16 pm
by djSupport
Raph is generally ultra busy at this time of year as he does mobile DJ/LJ work and its the festive season!