These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Sorry, the file is not usable...

Questions regarding the Behringer BCF2000 controller.
Post Reply
User avatar
dmxlighting
FS is my life
Posts: 1025
Joined: August 11th, 2008, 11:46 pm
FreeStyler Version: beta
I Use FreeStyler for: Where do I start?

Re: Sorry, the file is not usable...

Post by dmxlighting »

Not sure if its relevant to your problem but the lastest version of Bcedit does not work properly.
When trying to upload to your BCF it will cause an error. Apparently this is down to some asci mismatches in the program.
Its still working ok for creating your own patches, then export your setting and use 'Bome's SendSX' to upload to the BCF.
If anyone is interested I will post MY setup for BCF2000. Its setup for 5 presets. Each preset leaves all buttons and rotarys the same, only the faders change.
Let me know if you want a copy!


Freestyler DMX - Pissing over the competition since 199x
What do you want for free ?

Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert
User avatar
dmxlighting
FS is my life
Posts: 1025
Joined: August 11th, 2008, 11:46 pm
FreeStyler Version: beta
I Use FreeStyler for: Where do I start?

Re: Sorry, the file is not usable...

Post by dmxlighting »

Here is my BCF2000 set up.

It is comprised of 5 presets. Each preset only changes the channel numbers for the faders.
All other buttons and encoders remain on the same channels for every page.
fs_setup syx.zip
This should be loaded into your BCF2000 and I reccommend using this program to do it....
SendSX122.zip
You will need to assign midi control in fs setup, but thats a personal thing as to how you want it.
Freestyler DMX - Pissing over the competition since 199x
What do you want for free ?

Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert
User avatar
LJ_krede.dk
Moderator
Posts: 1028
Joined: October 29th, 2007, 8:01 pm
FreeStyler Version: 3.3.7
I Use FreeStyler for: Where do I start?

Re: Sorry, the file is not usable...

Post by LJ_krede.dk »

How did you make the syx file?
/LJ_krede.dk
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report
User avatar
dmxlighting
FS is my life
Posts: 1025
Joined: August 11th, 2008, 11:46 pm
FreeStyler Version: beta
I Use FreeStyler for: Where do I start?

Re: Sorry, the file is not usable...

Post by dmxlighting »

I used BcEdit.
There is a problem with BcEdit that means you cant upload to the BCF2000. Its a known problem and something to do with incorrect or unrecognised ascii's or something like that.
Freestyler DMX - Pissing over the competition since 199x
What do you want for free ?

Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert
User avatar
wardomon
Commited FS Forum helper
Posts: 134
Joined: November 22nd, 2010, 5:58 pm
FreeStyler Version: 3.4.6
I Use FreeStyler for: Church

Re: Sorry, the file is not usable...

Post by wardomon »

Where did this file go? It's not linked at the Wiki either.

fs_setup syx.zip
A little knowledge is a dangerous thing.
Post Reply

Return to “BCF2000”