These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Freestyler + enttec + showtec showdesigner 1024 [SOLVED]

Discussions concerning DMX gear in general.
Post Reply
Mikkel_G
Knows how to turn Lights ON
Posts: 4
Joined: October 29th, 2013, 4:10 pm
FreeStyler Version: 3.5.4
I Use FreeStyler for: DJ

Freestyler + enttec + showtec showdesigner 1024 [SOLVED]

Post by Mikkel_G »

I have a problem I use light mixer Showtec showdesigner 1024 and can't get it work together with freestyler, I have connected it to Enttec usb pro.
Can anybody tell if its possible to get those 2 things works together.


User avatar
Spirit
Pro Supporter! (Moderator)
Posts: 1421
Joined: July 10th, 2010, 8:55 pm
FreeStyler Version: 3.5.9
I Use FreeStyler for: Nightclub Lighting

Re: Freestyler + enttec + showtec showdesigner 1024

Post by Spirit »

FS needs a Dongle and enttec show desinger..need a Dongle.

From FS -> Enttec pro -> DMX cable -> Enttec pro -> Showdesinger..

/spirit
AMD FX-6100 (3.6ghz)x6, Nvidia 770GTX 4GB, 8GB Ram,ROG MB, enttec Pro, Open enttec, Velleman, T2250MTS-B1 22"touchscreen, Ilyama 23" screen, scans, dimm, rgbled, laser, soundsystem Just a drive-in show. Live and Dance
User avatar
buttza
FS is my life
Posts: 351
Joined: January 7th, 2010, 2:14 pm
FreeStyler Version: 3.6.4
I Use FreeStyler for: Stage Show
Twitter: twitter.com/@buttza

Re: Freestyler + enttec + showtec showdesigner 1024

Post by buttza »

You could possibly use Art-Net to connect.

"- ArtNet source
To run MSD Demo with an ArtNet source, make sure that the ArtNet source and the computer running MSD Demo are on the same network.
The network part of both IP numbers should be the same. So for a netmask of 255.255.255.0 the first three numbers of the IP address should be the same, for a netmask of 255.255.0.0 the first 2 numbers of the IP addresses should be the same and for a netmask of 255.0.0.0 only he first numbers has to be the same."

Might help. I run the Magic 3D Visualiser on a second computer and control it from my laptop with Freestyler using Art-Net. This allows me to spread the load on the GPU and CPU's.

Hope this helps.
Post Reply

Return to “Other DMX/Lighting questions”