These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

LED Stripe goes shortly on/off when changing cues. (DMX-512-Controller-Decoder-3-channell-LED-RGB-Stripe)

Discuss everything regarding DMX interfaces in this forum.
Post Reply
bego1969
Knows how to turn Lights ON
Posts: 5
Joined: August 18th, 2018, 10:55 am
FreeStyler Version: 3.6
I Use FreeStyler for: Theater

LED Stripe goes shortly on/off when changing cues. (DMX-512-Controller-Decoder-3-channell-LED-RGB-Stripe)

Post by bego1969 »

when changing from one cue to another my LED Stripe sometimes goes off and on.
the LED Stripe is connected with this controller:
https://www.ebay.de/itm/DMX-512-Control ... 2749.l2649

Strange is, sometimes the LED Stripe stays on, when changing to another cue, and sometimes it goes off for a very short moment and then on again...

The chases of this LED Stripe have the same values from chase to chase.
When i change from cue to cue and watching the dmx output under "Output" -> "Show Output"
the dmx values sometimes resets themself for a short moment. that is, when the LED Stripe then goes on and off.
Is this a bug???


bego1969
Knows how to turn Lights ON
Posts: 5
Joined: August 18th, 2018, 10:55 am
FreeStyler Version: 3.6
I Use FreeStyler for: Theater

Re: LED Stripe goes shortly on/off when changing cues. (DMX-512-Controller-Decoder-3-channell-LED-RGB-Stripe)

Post by bego1969 »

Solution :
The fixture we built for this led stripe was wrong!
Don't know where we did an error yet,
But now for testing we used a dimmer pack fixture with three channels and there this on/off error was not anymore visible.
Post Reply

Return to “DMX Interfaces”