These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

DMX reset signal...

Discuss everything regarding DMX interfaces in this forum.
Post Reply
Nuphotonix
Knows how to turn Lights ON
Posts: 3
Joined: September 2nd, 2016, 3:16 am
FreeStyler Version: 3.4.6
I Use FreeStyler for: Stage Show

DMX reset signal...

Post by Nuphotonix »

I am having to set all the fixtures DMX addresses after I reboot the cpu after shutting down for the night at the club. All DMX numbers display properly after power down of the CPU. when I boot the next night, all fixtures reset to 1. Frustrating. Is this a quirk on win 10 with frestyler2 and a UDMX controller?


MAAC
Just started using FS
Posts: 10
Joined: October 9th, 2010, 12:21 am

Re: DMX reset signal...

Post by MAAC »

There are fixtures where after changing the address You must press a "enter" key in order for them to store the configuration. Have You checked that ?
If the configuration is not saved and the power is interrupted, they default to the last saved address value.
Post Reply

Return to “DMX Interfaces”