These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

DMX King eDMX Issue

Discuss everything regarding DMX interfaces in this forum.
Post Reply
nightrider666
Knows how to turn Lights ON
Posts: 7
Joined: September 2nd, 2013, 8:14 am
FreeStyler Version: 3.5.4
I Use FreeStyler for: Just for the Fun of it.

DMX King eDMX Issue

Post by nightrider666 »

Hi all.
I purchased a DMX King brand eDMX1 (ethernet dongle which uses Artnet) to use with Freestyler. Has anyone successfully set up these two? I can't get any response from Freestyler, however I do from DMXControl. Hints on how to set up?

I also have another issue:
I am using is with 8 cheapy moving head lights
>these
http://www.ebay.com.au/itm/162-LED-DJ-M ... 2ab&_uhb=1

These were faulty when I purchased them, but am still trying to make them work.
What is wrong with them is that the dmx coding is not only reversed (lighting desk dmx code 1 responds when the dmx code on the light is 255), but also the lights only go up to 255 channels. This is causing issues when I try to run them from any software. Basically as soon as you move a slider, the lights go to that value, then bounce back to 0 and repeat.
I've worked out using the DMX King Config software that the lights will only work fine if the output is restricted to 255 channels. They also respond perfectly from a lighting desk I have.

Does anyone know how to set Freestyler to only output 255 (or less) channels?
Thanks


User avatar
djSupport
Hosts the Freestyler Forum and is an Admin!
Posts: 1901
Joined: July 9th, 2007, 6:57 pm
FreeStyler Version: Forum la
I Use FreeStyler for: Just for the Fun of it.
Contact:

Re: DMX King eDMX Issue

Post by djSupport »

Drop a line at dmxking.com the team will give you the best help if you don't get a reply here...

Sent from my Windows Phone 8X by HTC using Tapatalk
Heather Trott, You Babe! I Drive a Dacia Duster and Explore! Check it out
voxbox
Knows how to turn Lights ON
Posts: 2
Joined: July 12th, 2017, 11:59 pm
I Use FreeStyler for: Band

Re: DMX King eDMX Issue

Post by voxbox »

nightrider666 wrote: September 2nd, 2013, 8:23 am Hi all.
I purchased a DMX King brand eDMX1 (ethernet dongle which uses Artnet) to use with Freestyler. Has anyone successfully set up these two? I can't get any response from Freestyler, however I do from DMXControl. Hints on how to set up?
I have the same problem. Did you get it solved?
Post Reply

Return to “DMX Interfaces”