These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

uDMX windows 10 64bit

Discuss everything regarding DMX interfaces in this forum.
Post Reply
nokka
Knows how to turn Lights ON
Posts: 3
Joined: March 19th, 2012, 2:06 pm

uDMX windows 10 64bit

Post by nokka »

Did someone figure it out how to install it? I tried all tutorial that are online but unsucessfuly :(


mrstretch
Knows how to turn Lights ON
Posts: 8
Joined: May 30th, 2017, 11:20 am

Re: uDMX windows 10 64bit

Post by mrstretch »

I just posted this .. it will work have a issue leave me a comment.

I bought the dmx for 19.00 on ebay. It came with a small disk with a udmx driver. I couldnt get it to load . I figured it out after about a hour of searching. The issue lie in the device signature , the driver was not recognized. In order to deal with this here is the solution. Go to the start menue in the lower bottem then press and hold down the shift key while clicking on the restart button. the computer will open a blue screen with , continue , trouble shoot, or turn off pc.press trouble shoot. then press advanced options. now 6 options will show up.press start settings . then restart. The computer will reload and then it will ask you to press a button to continue . Here is where you press f7 or the 7 key. the computer will reset. now once this happens you wait to have it load as normal. once windows is open you can go to the go to the device manager. now plug in the udmx. the udmx will appear but has a issue . now click on the udmx and go to the driver section and select from the location like hard drive or file you put on the desk top. now it will ask you if you want to open this even tho the driver is not signed. the answer is yes . It will now load. once it loads it will come up as udmx in the driver section. now open freestyler and use the udmx as a 512 and your ready to work.


hope this helps someone else as the video from the company and youtube didnt help..

respect... Dj Stretch from Canada
mrstretch
Knows how to turn Lights ON
Posts: 8
Joined: May 30th, 2017, 11:20 am

Re: uDMX windows 10 64bit

Post by mrstretch »

also , depeneding on the disk they sent you it worked better if i opend the disk and dropped it on a folder on the desk top.. makes it easier to search later.
brin
Knows how to turn Lights ON
Posts: 1
Joined: October 3rd, 2019, 10:28 pm
FreeStyler Version: 3.6.50
I Use FreeStyler for: Theater

Re: uDMX windows 10 64bit

Post by brin »

THANKS a lot for this hint, didn't know windows 8.1 good enough...

no I got the drivers installed

again thanks for sharing

regards, brin
Bikash Saha
Knows how to turn Lights ON
Posts: 6
Joined: December 11th, 2019, 9:33 am
FreeStyler Version: 3.4.6
I Use FreeStyler for: Stage Show
Twitter: no
Instagram: no

Re: uDMX windows 10 64bit

Post by Bikash Saha »

how to install driver in windows 10 64 bit
Bikash Saha
Knows how to turn Lights ON
Posts: 6
Joined: December 11th, 2019, 9:33 am
FreeStyler Version: 3.4.6
I Use FreeStyler for: Stage Show
Twitter: no
Instagram: no

Re: uDMX windows 10 64bit

Post by Bikash Saha »

how to install driver in windows 10 64 bit
RRRocks505
Knows how to turn Lights ON
Posts: 1
Joined: May 2nd, 2019, 9:41 pm
FreeStyler Version: 3.6.49
I Use FreeStyler for: Just for the Fun of it.

LC+ nor

Post by RRRocks505 »

After spending the last 5 days trying to get uDMX to work on a new laptop, I finally figured it out. When I installed on my desktop a year ago, I did the changes that allow unsigned drivers to be installed, did not want to do that this time. Tried the Zadig install, it did not work with libusbk or Winusb. Zadig installed but uDMX would not work with QLC+ nor Freestyler. Finally looked in the uDMX driver folder and found a little exe called InstallDriver.exe. Ran that and it installed and uDMX now works. Note that as per ilLUTZmination.de I manually copied uDMX.dll to <Windows>System32 directory. I did this while trying the other installation procedures so not sure it is necessary but it can't hurt anything.
SiGNe
Has mastered Fixture Creator
Posts: 36
Joined: October 14th, 2012, 7:30 pm
FreeStyler Version: 4.01
I Use FreeStyler for: Home Lighting Control

Re: uDMX windows 10 64bit

Post by SiGNe »

Post Reply

Return to “DMX Interfaces”