Here's 2 FreeStyler fixture files for the JB-Systems COB-4BAR.
"JB SYSTEMS COB4BAR" is a fixture file for the entire 4-bar (e.g.: it controls all 4 lights). The 4-bar needs to be configured in 17-channel mode for this fixture file.
"JB SYSTEMS COB4BAR 1UNIT" is a fixture file for just 1 RGB unit on the 4-bar. The 4-bar needs to be configured in 18-channel mode. You need to add 4 of these fixtures to FreeStyler to be able to control them. If the DMX channel for the 4-bar is 1, then the first fixture needs to be addressed at DMX channel 1. The second fixture DMX channel 5, the third fixture DMX channel 9, and the fourth DMX channel 13.
If you need to be able to control the 2 relays that are inside the 4bar, add 2 generic switches to FreeStyler and address them to DMX channel 17 and 18.
Advantage for the "JB SYSTEMS COB4BAR 1UNIT" is that each RGB fixture has an intensity channel for itself. So I recommend to use that.
If you are lazy and just want to add one fixture, then use the "JB SYSTEMS COB4BAR" unit, but the intensity channel of that device controls the intensity of all RGB units at the same time.
JB-Systems COB-4BAR fixture file
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
- remco_k
- Moderator
- Posts: 1233
- Joined: October 12th, 2008, 11:27 pm
- FreeStyler Version: N/A
- I Use FreeStyler for: To help others here on the Forum!
JB-Systems COB-4BAR fixture file
You do not have the required permissions to view the files attached to this post.
Developer of the Sound 2 Light application (SL.exe) for FreeStyler: https://www.digiplay.nl/fs
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl