Help with Chauvet Intimidator 150 spot led [SOLVED]
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
- Starting to get to grips with FreeStyler
- Posts: 18
- Joined: July 19th, 2015, 11:44 pm
- I Use FreeStyler for: Just for the Fun of it.
-
- Starting to get to grips with FreeStyler
- Posts: 18
- Joined: July 19th, 2015, 11:44 pm
- I Use FreeStyler for: Just for the Fun of it.
Re: Help with Chauvet Intimidator 150 spot led
i just installed the chauvet derby x and it work as supposed too so i know my dongle is working.. i dont understand why i cant get the intimidator to work. im sure someone has used this light before on FS.
-
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Help with Chauvet Intimidator 150 spot led
Hej again.
We have cleared that it is not the fixture file and that FS runs, as the output monitor shows which values that are send to the dmx dongle and they chances when you adjust the faders.
Somehow the enttec and intimidator don't like each other.
Here I am a bit lost but I think there are a update parameter which can be set.
I think it is under Interface setup -> Advanced.
I also think it will be a good idea to make a new post for help on the enttec dongle in the "FreeStyler Software" or "DMX interface" area.
There are many using the enttec dongle so it should be possible to get some help on this.
Just a silly question.
The fixture can in be set in different modes and if so, is it then set to the right mode.
/Jan
We have cleared that it is not the fixture file and that FS runs, as the output monitor shows which values that are send to the dmx dongle and they chances when you adjust the faders.
Somehow the enttec and intimidator don't like each other.
Here I am a bit lost but I think there are a update parameter which can be set.
I think it is under Interface setup -> Advanced.
I also think it will be a good idea to make a new post for help on the enttec dongle in the "FreeStyler Software" or "DMX interface" area.
There are many using the enttec dongle so it should be possible to get some help on this.
Just a silly question.
The fixture can in be set in different modes and if so, is it then set to the right mode.
/Jan
-
- Starting to get to grips with FreeStyler
- Posts: 18
- Joined: July 19th, 2015, 11:44 pm
- I Use FreeStyler for: Just for the Fun of it.
Re: Help with Chauvet Intimidator 150 spot led
Yay! i got it figured out. now i can move forward. What I did was discarded the profile i was working with and started from scratch one more time, after watching a video in a different language and not knowing what he was saying i just watched and picked up a couple of things i was doing wrong when creating the profile.. I'll complete the profile and up load it .. Thanks Jan for your support and help also