Hi there, i have a beamz iris laser and i'm looking to connect it to freestyler but there seems to be no dmx protocol or manual of any kind on the web. is it still possible to create a fixture with no manual?
Any help and tips would be muchly appreciated.
Cheers
Beamz Iris Laser Fixture help?
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
pjatkinson
- Knows how to turn Lights ON
- Posts: 1
- Joined: January 12th, 2015, 11:52 pm
- FreeStyler Version: 3.5
- I Use FreeStyler for: Just for the Fun of it.
-
Nathanrs93
- Moderator
- Posts: 948
- Joined: September 18th, 2012, 9:32 pm
- FreeStyler Version: None
- I Use FreeStyler for: To help others here on the Forum!
Re: Beamz Iris Laser Fixture help?
It's very difficult and hard to create without the manual or DMX table, but is possible for people like yourself who have the fixture in front of them.
You would have to connect the fixture to freestyler, then patch a generic fixture of about 20 channels (just because lasers can be big) and then using the right hand sliders, note down what each one does when you put it to certain values. Remember this is hard and not IDEAL as it takes time and patience!
You would have to connect the fixture to freestyler, then patch a generic fixture of about 20 channels (just because lasers can be big) and then using the right hand sliders, note down what each one does when you put it to certain values. Remember this is hard and not IDEAL as it takes time and patience!