Good evening all,
I have a pair of Ehrgeiz FS-60 RGB Bars that I am connecting to via DMX/Freestyler. I have a fixture file currenty to have it run in mode 2 (RGB + Dimmer & Strobe), but I am going to get around to the 60 channel fixture file....
Now, these units have 18 built in Programs which are accessible from the menu at the rear of the fixture. How do I trigger these from within Freestyler?
The manual only supplies the DMX modes with channels etc, so nothing about Macros
Apologies if this post in in the wrong section...
Thanks Again.
LED Bar Built In Program Accessing... [SOLVED]
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
- Knows how to turn Lights ON
- Posts: 3
- Joined: November 3rd, 2014, 5:14 am
- FreeStyler Version: 3.5.7
- I Use FreeStyler for: Nightclub Lighting
-
- FS is my life
- Posts: 253
- Joined: April 9th, 2012, 10:27 pm
- FreeStyler Version: 3.5.7
- I Use FreeStyler for: DJ
- Contact:
Re: LED Bar Built In Program Accessing...
It looks like it is in the wrong section....
But anyways, people would be more likely to be able to help if you posted up your fixture so far, and a link to or picture of manual / dmx chart.
But anyways, people would be more likely to be able to help if you posted up your fixture so far, and a link to or picture of manual / dmx chart.
-
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: LED Bar Built In Program Accessing...
Hej
I Just had a quick look in the manual
There is no channel for the build-in programs so you can not control them with DMX.
/Jan
I Just had a quick look in the manual
There is no channel for the build-in programs so you can not control them with DMX.
/Jan
-
- Knows how to turn Lights ON
- Posts: 3
- Joined: November 3rd, 2014, 5:14 am
- FreeStyler Version: 3.5.7
- I Use FreeStyler for: Nightclub Lighting
Re: LED Bar Built In Program Accessing...
Thanks for that Looks like its just simple colors for now ha ha