I need a bit of help setting up a Chinese PAR light I got.
I've created a new fixture and got R G B and the Strobe to work, but have no idea on how to program CH 1, 6, or 7 -- if that's even possible. Not exactly sure where to put the values within Fixture Creator.
Help with Chinese Par LED [SOLVED]
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
- Knows how to turn Lights ON
- Posts: 5
- Joined: October 17th, 2014, 1:51 pm
- FreeStyler Version: 3.7
- I Use FreeStyler for: Bedroom Lighting.
- Twitter: None
Help with Chinese Par LED [SOLVED]
You do not have the required permissions to view the files attached to this post.
-
- FS is my life
- Posts: 253
- Joined: April 9th, 2012, 10:27 pm
- FreeStyler Version: 3.5.7
- I Use FreeStyler for: DJ
- Contact:
Re: Help with Chinese Par LED
Hi,
Looks really similar to one I had so I just tweaked couple of values to make it fit.
Main things to remember when testing;
* You will need to set the master intensity / dimmer up to see anything.
* There is no proper program speed option in freestyler so I used the 'zoom' slider to control the speed of the lights built in programs.
The auto programs on the light can be activated by clicking the macro button for whatever program number you want to use, but if you do dont forget you will need to set all your other sequences to SNAP to OFF to turn it back off again.
Obviously I cant test it for you so good luck!
Looks really similar to one I had so I just tweaked couple of values to make it fit.
Main things to remember when testing;
* You will need to set the master intensity / dimmer up to see anything.
* There is no proper program speed option in freestyler so I used the 'zoom' slider to control the speed of the lights built in programs.
The auto programs on the light can be activated by clicking the macro button for whatever program number you want to use, but if you do dont forget you will need to set all your other sequences to SNAP to OFF to turn it back off again.
Obviously I cant test it for you so good luck!
You do not have the required permissions to view the files attached to this post.
-
- Knows how to turn Lights ON
- Posts: 5
- Joined: October 17th, 2014, 1:51 pm
- FreeStyler Version: 3.7
- I Use FreeStyler for: Bedroom Lighting.
- Twitter: None
Re: Help with Chinese Par LED
Everything works!!!! Thank you!