Hi i'm new on this forum.
I'm a french Dj and i'm starting animation activity.
I start using Freestyler with my lights and I have just buy this Laser but it's too difficult for me to create fixture in fixture creator.
Is anyone able to help me or create a fixture for me?
I will upload what i have try to do but it's a very bad creation. I continue to edit the fixture...
Thanks
Laser Excelighting club 500 RGB
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
omsoad
- Knows how to turn Lights ON
- Posts: 5
- Joined: March 20th, 2014, 12:14 am
- FreeStyler Version: 3.634
- I Use FreeStyler for: DJ
-
omsoad
- Knows how to turn Lights ON
- Posts: 5
- Joined: March 20th, 2014, 12:14 am
- FreeStyler Version: 3.634
- I Use FreeStyler for: DJ
Re: Laser Excelighting club 500 RGB
Just a world: too difficult for me. 24 Ch is to hard...
No one can help me?
No one can help me?
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Laser Excelighting club 500 RGB
Hej omsoad
Lasers are in general a bit difficult as nothing fit into the normal control.
I just had a look for a manual and the only one I could find was a French and that don't make it easier.
But a start will be to attach a manual here then we can see if anyone will give it a try.
/Jan
Lasers are in general a bit difficult as nothing fit into the normal control.
I just had a look for a manual and the only one I could find was a French and that don't make it easier.
But a start will be to attach a manual here then we can see if anyone will give it a try.
/Jan
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Laser Excelighting club 500 RGB
Hej again.
I had a brain accident so I copied the French DMX table into a word doc and used google translate.
Can you have a look on the text and eventually correct what google missed in the translation.
That could be a start.
Also you said 24 channels.
The DMX table have 26 ?
/Jan
I had a brain accident so I copied the French DMX table into a word doc and used google translate.
Can you have a look on the text and eventually correct what google missed in the translation.
That could be a start.
Also you said 24 channels.
The DMX table have 26 ?
/Jan
You do not have the required permissions to view the files attached to this post.
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Laser Excelighting club 500 RGB
I had a closer look on the table and I think you should make 2 fixtures, one for each beam, and then use them as combined fixtures.
Placed on the same start address.
See eventually the tutorials on the wiki.
I think I would split them this way.
There are a lot of patterns where you have to figure out how they are configured.
My guess is that they are controlled by channel 4/15 and channel 26 in combination.
You probably don't the images for the patterns so give them a number icon.
There is also a laser tutorial on the wiki.
/Jan
Placed on the same start address.
See eventually the tutorials on the wiki.
I think I would split them this way.
There are a lot of patterns where you have to figure out how they are configured.
My guess is that they are controlled by channel 4/15 and channel 26 in combination.
You probably don't the images for the patterns so give them a number icon.
There is also a laser tutorial on the wiki.
/Jan
You do not have the required permissions to view the files attached to this post.
-
omsoad
- Knows how to turn Lights ON
- Posts: 5
- Joined: March 20th, 2014, 12:14 am
- FreeStyler Version: 3.634
- I Use FreeStyler for: DJ
Re: Laser Excelighting club 500 RGB
Hi,
First thanks for your answer.
I have read your translated document. I think it's good. There is some grammatical errors but all is easy to understand.
There is 26 channels, not 24, sorry.
I had a look to your fixture proposition... Does it mean that i will use the laser as two separated lasers? Only one fixture seem to be impossible?
I think that i will create (if possible) a simply fixture with minimal controls: i will do only beam show for the moment and will not use drawing.
i will start to create your "double fixture" and post it here, and maybe also try to create another fixture just for beam show in automatic sound mode...
I will read tutorial for that!
Thanks again, and see you later.
ps: sorry for may bad english!
First thanks for your answer.
I have read your translated document. I think it's good. There is some grammatical errors but all is easy to understand.
There is 26 channels, not 24, sorry.
I had a look to your fixture proposition... Does it mean that i will use the laser as two separated lasers? Only one fixture seem to be impossible?
I think that i will create (if possible) a simply fixture with minimal controls: i will do only beam show for the moment and will not use drawing.
i will start to create your "double fixture" and post it here, and maybe also try to create another fixture just for beam show in automatic sound mode...
I will read tutorial for that!
Thanks again, and see you later.
ps: sorry for may bad english!
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Laser Excelighting club 500 RGB
Hej again
Sorry for the late answer. (Vacation).
I think you will get the best performance if you split this in two fixtures.
Else I think you will end with a lot of faders which you don't have any feeling with.
There are some tutorials of how to use combined fixtures.
http://www.freestylersupport.com/wiki/f ... d_fixtures
http://www.freestylersupport.com/wiki/f ... ter_effect
There is also a lase tutorial but lasers are in general a bit difficult to control.
http://www.freestylersupport.com/wiki/f ... ld_rs_200g
/Jan
Sorry for the late answer. (Vacation).
I think you will get the best performance if you split this in two fixtures.
Else I think you will end with a lot of faders which you don't have any feeling with.
There are some tutorials of how to use combined fixtures.
http://www.freestylersupport.com/wiki/f ... d_fixtures
http://www.freestylersupport.com/wiki/f ... ter_effect
There is also a lase tutorial but lasers are in general a bit difficult to control.
http://www.freestylersupport.com/wiki/f ... ld_rs_200g
/Jan