These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE
if all else fails and you need a fixture consider the fixture building service HERE

LED Strobe - Chinese 6 channel RGB Wash [SOLVED]

Fixture File Help & Support, This is not a Request forum we are here to help you not work for you... If you do need a fixture and don't wish to make one yourself or learn then go here : http://www.freestylersupport.com/wiki/f ... on_service
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service

You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
Post Reply
twotone12
Knows how to turn Lights ON
Posts: 5
Joined: March 3rd, 2014, 12:05 am
I Use FreeStyler for: DJ

LED Strobe - Chinese 6 channel RGB Wash [SOLVED]

Post by twotone12 »

Hi All.
I have been trying to setup this 6 channel light on fixture creator.
It is a 6 Channel with values from 1-255.
-Master Dimmer
-Red
-Green
-Blue
-Master Strobe

- 7 Colours choosing
- 2 mixing colours changing
- Colour changing. Slow to fast.

Finally i have some control over it with channel 1 slid across i get Red,Green and Blue and can strobe.
However currently as i sit here it is just staying on green, Even without having any sliders on a value.
When i slide any of Red/green/blue across i get a mix of the green.

How can i disable the green or turn off the led.

Channel 6 runs through all the colours however i can only operate strobe when set at 0.


Any help much appreciated as i have been googling and looking at the forums since last night with no result thus far.

Thanks in Advance.


Kev.


Top
Nathanrs93
Moderator
Posts: 948
Joined: September 18th, 2012, 9:32 pm
FreeStyler Version: None
I Use FreeStyler for: To help others here on the Forum!

Re: LED Strobe - Chinese 6 channel RGB Wash

Post by Nathanrs93 »

It can be quite hard without a proper manual, but you could use a 6 channel generic fixture and see if you can create a fixture from that. However, you could use the 6 channel generic fixture to control it. It might be easier
Top
twotone12
Knows how to turn Lights ON
Posts: 5
Joined: March 3rd, 2014, 12:05 am
I Use FreeStyler for: DJ

Re: LED Strobe - Chinese 6 channel RGB Wash

Post by twotone12 »

Thanks for reply.
I have nearly full control over it just as soon as i plug in the xlr cable it lights up green and stays that way with all the faders.Meaning i can get other colours but all are mixed with green.
Same with the strobe, It goes to green after each flash.
Will keep changing setting but please post if anyone has any further suggestions.
Top
twotone12
Knows how to turn Lights ON
Posts: 5
Joined: March 3rd, 2014, 12:05 am
I Use FreeStyler for: DJ

Re: LED Strobe - Chinese 6 channel RGB Wash

Post by twotone12 »

Fixed - Turns out there was an issue with the casing shorting some wires.
All working perfect now.
Top
Post Reply

Return to “FreeStyler Fixture Files - Help & Support”