These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Venue LED Par 64 & Thin Par 64 [SOLVED]

Fixture File Help & Support, This is not a Request forum we are here to help you not work for you... If you do need a fixture and don't wish to make one yourself or learn then go here : http://www.freestylersupport.com/wiki/f ... on_service
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service


You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
Post Reply
rich4av
Knows how to turn Lights ON
Posts: 7
Joined: January 21st, 2014, 1:46 pm
FreeStyler Version: 3.5.5
I Use FreeStyler for: Church

Venue LED Par 64 & Thin Par 64 [SOLVED]

Post by rich4av »

Anyone have experience running the Venue LED Par 64 and/or Venue Thin Par 64 fixtures with FS? I'm having issues with my standard par cans flickering when I put the LED's in the chain. Here's my setup:

Windows XP
Freestyler 3.5.5
Enttec USB Pro
Elation DP-415 Dimmer (running 4 pars, dmx ch. 1-4)
Elation DP-415 Dimmer (running 4 pars, dmx ch. 5-8)
Elation DP-415 Dimmer (running 4 pars, dmx ch. 9-12)
2) Venue LED Par 64's (both set to dmx ch. 13-18 so they mirror each other)
2) Venue Thin Par 64's (both set to dmx ch. 19-25 so they mirror each other)

When I get everything in line, dimmer #1 (ch. 1-4), the pars flicker when I raise the fader. I have the chain terminated so I'm not thinking it's that. Cables are tested and known to be good.

Any ideas on the LED fixtures are greatly appreciated.
Last edited by rich4av on January 22nd, 2014, 3:08 pm, edited 1 time in total.


rich4av
Knows how to turn Lights ON
Posts: 7
Joined: January 21st, 2014, 1:46 pm
FreeStyler Version: 3.5.5
I Use FreeStyler for: Church

Re: Venue LED Par 64 & Thin Par 64

Post by rich4av »

[UPDATE] Tonight I tried just one Venue LED Par 64 in line and everything works fine (even with no terminator). Plug in the 2nd LED light and Dimmer 1 (DMX ch. 1-4) flickers again. Same situation with 1) Venue ThinPar 64, everything fine. Hook up the 2nd one and the problem is back

Also, I should mention that this exact same setup works flawlessly when i run it with a standard DMX console (Lightronics TL-5024). Issue only appears when i try to run from laptop using Freestyler.
rich4av
Knows how to turn Lights ON
Posts: 7
Joined: January 21st, 2014, 1:46 pm
FreeStyler Version: 3.5.5
I Use FreeStyler for: Church

Re: Venue LED Par 64 & Thin Par 64

Post by rich4av »

[Solution] After trying several different configurations of wiring, switching cables, and termination methods, I decided to try the only thing i hadn't thus far. I ran straight from the Enttec Pro into the LED lights FIRST, then looped out to the dimmers so they were last in the chain. This worked successfully and all lights are now behaving as expected with no flickers. I can only assume that having the LED's at the end of the chain where sucking up the DMX signal and not letting it cycle back to the first dimmer in line.

Also, for anyone else using the Venue Thinpar 64, i selected the ADJ MegaPar profile (also 7 ch. dmx) and it worked perfectly for this fixture.
Post Reply

Return to “FreeStyler Fixture Files - Help & Support”