These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Help Please - Showtec Phantom 50 Spot LED [SOLVED]

Fixture File Help & Support, This is not a Request forum we are here to help you not work for you... If you do need a fixture and don't wish to make one yourself or learn then go here : http://www.freestylersupport.com/wiki/f ... on_service
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service


You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
Post Reply
User avatar
BillsGate
Possibly Becoming Qualified FS User
Posts: 54
Joined: June 5th, 2011, 9:06 am
FreeStyler Version: 4.x
I Use FreeStyler for: DJ
Contact:

Re: Help Please - Showtec Phantom 50 Spot LED

Post by BillsGate »

It seems like you are using a 13ch fixture while the lamp is set to 8ch. I have set mine to 13ch mode


User avatar
Uriahdemon
FS is my life
Posts: 266
Joined: August 18th, 2012, 10:15 am
FreeStyler Version: 3.5.5
I Use FreeStyler for: Band
Contact:

Re: Help Please - Showtec Phantom 50 Spot LED

Post by Uriahdemon »

Hi Folks,

Does anyone have an Easy View 3D file for this fixture please. The built in one does not correspond with the FS fixture file due to the Pan and Tilt channels being built wrongly. The FS fixture file corresponds with the manual i.e. CH 1 - Pan, CH2 - Tilt, CH3 Pan 16 Bit, CH 4 16 Bit.

Unfortunately the Easy View 3D fixture file is set up for CH1 - Pan, CH2 - Pan 16Bit, CH3 - Tilt, CH3 - Tilt, CH4 - Tilt 16 Bit.

Any help greatly appreciated as I am not too good with EV3D fixture creating and need to get this sorted ASAP. I am working on it though and as soon as I have it sorted I will share with others.
Nathanrs93
Moderator
Posts: 948
Joined: September 18th, 2012, 9:32 pm
FreeStyler Version: None
I Use FreeStyler for: To help others here on the Forum!

Re: Help Please - Showtec Phantom 50 Spot LED

Post by Nathanrs93 »

Uriahdemon wrote:Hi Folks,

Does anyone have an Easy View 3D file for this fixture please. The built in one does not correspond with the FS fixture file due to the Pan and Tilt channels being built wrongly. The FS fixture file corresponds with the manual i.e. CH 1 - Pan, CH2 - Tilt, CH3 Pan 16 Bit, CH 4 16 Bit.

Unfortunately the Easy View 3D fixture file is set up for CH1 - Pan, CH2 - Pan 16Bit, CH3 - Tilt, CH3 - Tilt, CH4 - Tilt 16 Bit.

Any help greatly appreciated as I am not too good with EV3D fixture creating and need to get this sorted ASAP. I am working on it though and as soon as I have it sorted I will share with others.
+

Hey, I've had a bit of experience with 3D files and creating them. If you wanna PM me the manual or post it here, then I'll see if I can create it for you like the FS one is setup :)
User avatar
Uriahdemon
FS is my life
Posts: 266
Joined: August 18th, 2012, 10:15 am
FreeStyler Version: 3.5.5
I Use FreeStyler for: Band
Contact:

Re: Help Please - Showtec Phantom 50 Spot LED

Post by Uriahdemon »

Hi Nathanars,

Just spent a little time sorting stuff out and it was the Easy View 3D fixture file that was wrong. So I have amended it and all good now. I am doing some experimenting before buying the moving heads I am thinking of. What was actually wrong was the Tilt and Pan 8/16 bit channels were the wrong way round.

I should really have spotted that sooner.

Thanks for the offer of help anyway. I am sure there will be another time pretty soon.

Rgds Mac
Nathanrs93
Moderator
Posts: 948
Joined: September 18th, 2012, 9:32 pm
FreeStyler Version: None
I Use FreeStyler for: To help others here on the Forum!

Re: Help Please - Showtec Phantom 50 Spot LED

Post by Nathanrs93 »

Glad you sorted it :)
Post Reply

Return to “FreeStyler Fixture Files - Help & Support”