These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Problem with LED spot

Fixture File Help & Support, This is not a Request forum we are here to help you not work for you... If you do need a fixture and don't wish to make one yourself or learn then go here : http://www.freestylersupport.com/wiki/f ... on_service
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service


You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
Post Reply
Peter B.
Knows how to turn Lights ON
Posts: 6
Joined: March 29th, 2012, 9:29 pm
I Use FreeStyler for: DJ

Problem with LED spot

Post by Peter B. »

I have a problem with the Eurolite LED PST-9W RGB DMX Spot.
I have made a fixture, and it works fine in Create Sequence.
But when I save it, and try to run it in the Cue window, I get no light from it.
I'm not sure what to write in Shutter + Lamp.

Any help will be very much appreciated :)

Fixture Config:
https://dl.dropboxusercontent.com/u/395 ... config.jpg

Channel Description:
https://dl.dropboxusercontent.com/u/395 ... iption.jpg

Macros:
https://dl.dropboxusercontent.com/u/39538882/Macros.jpg

DMX Protocol:
https://dl.dropboxusercontent.com/u/395 ... otocol.jpg

The fixture file:
https://dl.dropboxusercontent.com/u/395 ... %20TCL.fxt


User avatar
Kings
Commited FS Forum helper
Posts: 194
Joined: October 12th, 2009, 5:51 am
Twitter: twitter.com/

Re: Problem with LED spot

Post by Kings »

When you run the sequence, open the 'show DMX' window and look at the channel number that has intensity and/or shutter value for the fixture. Its a great way of checking if FS is actually sending the correct DMX signal/value to that channel.
User avatar
Kings
Commited FS Forum helper
Posts: 194
Joined: October 12th, 2009, 5:51 am
Twitter: twitter.com/

Re: Problem with LED spot

Post by Kings »

Mmm...odd that it has an intensity channel and a different 'on' channel. This is what I would do to the fixture profile:

1) Delete details for lamp channel and put them in the intensity channel as channel = 4, min = 0, Max = 255
2) Delete all details in the Shutter channel.
3) For the strobe channel, use the following values - channel = 5, off = 8 (strobing is off but the light is on), low = 11, medium = 130, high = 254

Ok...

So now when you program a sequence, make sure the strobe is off on channel 5 (but the LEDs will be on) and also a value for the intensity channel (channel 4). To turn the fixture 'off', reduce the intensity to 0. Hopefully this will mean all the LEDs are off.
Jan_K
Pro Supporter! (Moderator)
Posts: 1155
Joined: January 4th, 2011, 9:57 pm
FreeStyler Version: Beta
I Use FreeStyler for: To help others here on the Forum!

Re: Problem with LED spot

Post by Jan_K »

Hej Peter B

Try to open "Sub Master" panel and adjust the fader that correspond to sequence in the cue to 100%
Example:
If your sequence is no 3 in the cue then adjust the Sub Master no 3 to 100%.
I know you don't uses the SM and that the window are empty but try it.

/Jan
Peter B.
Knows how to turn Lights ON
Posts: 6
Joined: March 29th, 2012, 9:29 pm
I Use FreeStyler for: DJ

Re: Problem with LED spot

Post by Peter B. »

I think I got it now :)
I tried to use the submaster intensity fader, and it worked.

Then I changed the fixture settings as Kings described, but with no luck.
But when I set both the Lamp and Intensity channel to channel 4, and values 0 + 255, it all works fine without having to adjust the submaster fader.

Thank you very much for helping me, to all of you :D
Jan_K
Pro Supporter! (Moderator)
Posts: 1155
Joined: January 4th, 2011, 9:57 pm
FreeStyler Version: Beta
I Use FreeStyler for: To help others here on the Forum!

Re: Problem with LED spot

Post by Jan_K »

The thing with the SM is that if the sequenc contain an intensity channel then the SM fader is in control even if the SM isen't used.
If the intensity channel is added to lamp channel additional then FS may registrate that the channel isen't a intensity channel and therefore it works.

There are more info on the wiki about the SM.

/Jan
Post Reply

Return to “FreeStyler Fixture Files - Help & Support”