These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.
First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE

if all else fails and you need a fixture consider the fixture building service HERE

Cameo CLPFLAT1RGB10IR FLAT PAR [SOLVED]

A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!

You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
Forum rules
A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!

IF YOU HAVE HAD A REQUEST FULFILLED PLEASE MARK THE TOPIC AS SOLVED!

You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
Post Reply
toomuchmetal
Knows how to turn Lights ON
Posts: 1
Joined: November 12th, 2014, 4:53 pm
FreeStyler Version: 3.5.7
I Use FreeStyler for: Band

Cameo CLPFLAT1RGB10IR FLAT PAR [SOLVED]

Post by toomuchmetal »

Hi all,

I'm pretty new to software lighting (pretty much as of last night).

Does anyone have any experience with The Cameo Flat Pars Spot lights?

I am trying to control them from Reaper, through Midi Yoke, into Freestyler and out through a Velleman K8062.

Although there is no dedicated fixture profile for this light, so I have been controlling with 6 separate Parcan channels.

FreeStyler is receiving the message from Reaper, but the lights don't seem to be doing anything, however when I control the lights directly from FreeStyler or Velleman's test software, they do what I would expect them to.

The lights are 6 channel, with a Dimmer channel, a strobe channel, a red, a green and a blue channel, and I believe the 6th is sound to light.

Could anyone suggest an alternative fixture profile that I could use?

Thanks
Phil


Nathanrs93
Moderator
Posts: 948
Joined: September 18th, 2012, 9:32 pm
FreeStyler Version: None
I Use FreeStyler for: To help others here on the Forum!

Re: Cameo CLPFLAT1RGB10IR FLAT PAR

Post by Nathanrs93 »

I find it's always better and safer to create a actual proper fixture file for it.

Because I'm feeling nice today, here's the fixture, 6 Channel Mode

Iris Channel = Colour Change (Rate)
Focus Channel = Colour Blending (Rate)
Frost Channel = Microphone Sensitivity Control
You do not have the required permissions to view the files attached to this post.
Post Reply

Return to “FreeStyler Fixture Files - Fixture Requests”