Hello,
my dad bought few times ago a Varytec LED Laser 4.
In the discreption of this light it says, that you can program it with 6 dmx channels - but I don't know how it works and I've searched the forum and can't find anything about this.
Somebody can help?
Here's a German seller site.
http://www.thomann.de/de/varytec_led_laser_4.htm
Thanks
Luke
Varytec LED Laser 4
Forum rules
A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!
IF YOU HAVE HAD A REQUEST FULFILLED PLEASE MARK THE TOPIC AS SOLVED!
You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!
IF YOU HAVE HAD A REQUEST FULFILLED PLEASE MARK THE TOPIC AS SOLVED!
You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
-
YorkLuke
- Knows how to turn Lights ON
- Posts: 4
- Joined: October 19th, 2011, 8:53 pm
- I Use FreeStyler for: Nightclub Lighting
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Varytec LED Laser 4
Hej Luke.
Please upload the manual / DMX table.
I could not find the DMX table direct on the net and witout that it is quit dificult to help you.
/Jan
Please upload the manual / DMX table.
I could not find the DMX table direct on the net and witout that it is quit dificult to help you.
/Jan
-
YorkLuke
- Knows how to turn Lights ON
- Posts: 4
- Joined: October 19th, 2011, 8:53 pm
- I Use FreeStyler for: Nightclub Lighting
Re: Varytec LED Laser 4
Hello,
just found that one in german
http://images4.thomann.de/pics/prod/253 ... eitung.pdf
regards
luke
just found that one in german
http://images4.thomann.de/pics/prod/253 ... eitung.pdf
regards
luke
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Varytec LED Laser 4
Hej again Luke.
Do you have a Freestyler - DMX system up running and do you have a fixture or are you to start on it.
/Jan
Do you have a Freestyler - DMX system up running and do you have a fixture or are you to start on it.
/Jan
-
YorkLuke
- Knows how to turn Lights ON
- Posts: 4
- Joined: October 19th, 2011, 8:53 pm
- I Use FreeStyler for: Nightclub Lighting
Re: Varytec LED Laser 4
Hey,
in this row i got 2 Showtec Micro Spot Moving Heads with 13 chan.
So I want to have it after this 2... Starting Adress is 1 at Moving Head 1 and 14 at Moving Head 2 ... Must be 27 than i think
Regards
in this row i got 2 Showtec Micro Spot Moving Heads with 13 chan.
So I want to have it after this 2... Starting Adress is 1 at Moving Head 1 and 14 at Moving Head 2 ... Must be 27 than i think
Regards
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Varytec LED Laser 4
Hej again
You have to make a fixture for this device in Fixture Creator.
Total channel 6
Shutter ch. 1, Open = 0, Closed = 255
On the color control
Enable CMY /RGB and enable RGB values.
Then Red Ch. = 2
Green ch. = 3
Blue ch. = 4
Then you have the 37 programs.
There is no values given that tells wher the shift from one program to the next are.
The easy way to figure that out is save the fixture add it in Freestyler and then turn it all on.
In right side of "FreeStyler" there are 6 faders when you have selected the laser fixture.
Adjust fader 6 to half position.
Then slowly move fader 5 and record all the values where the programs shifts.
When you have these values then you go back to Fixture creator.
Place the Gobo ch 1 0n 5 and n gobos = 38
Gobo rot1 6
Then you have to fill in all the program values.
Don't use the shift values but the in between values
Example: Shift value from program 10 to 11 is 150, and from 11 to 12 is 160.
Then the value you are to enter for gobo 11 is 155. The between value.
The to the don't like thing.
Go to wiki, read the Fixture creator tutorials.
There are hints on image sizes, file names and much more.
Know the you want to turn on the laser as fast as possible but take the time to do this correct.
/Jan
You have to make a fixture for this device in Fixture Creator.
Total channel 6
Shutter ch. 1, Open = 0, Closed = 255
On the color control
Enable CMY /RGB and enable RGB values.
Then Red Ch. = 2
Green ch. = 3
Blue ch. = 4
Then you have the 37 programs.
There is no values given that tells wher the shift from one program to the next are.
The easy way to figure that out is save the fixture add it in Freestyler and then turn it all on.
In right side of "FreeStyler" there are 6 faders when you have selected the laser fixture.
Adjust fader 6 to half position.
Then slowly move fader 5 and record all the values where the programs shifts.
When you have these values then you go back to Fixture creator.
Place the Gobo ch 1 0n 5 and n gobos = 38
Gobo rot1 6
Then you have to fill in all the program values.
Don't use the shift values but the in between values
Example: Shift value from program 10 to 11 is 150, and from 11 to 12 is 160.
Then the value you are to enter for gobo 11 is 155. The between value.
The to the don't like thing.
Go to wiki, read the Fixture creator tutorials.
There are hints on image sizes, file names and much more.
Know the you want to turn on the laser as fast as possible but take the time to do this correct.
/Jan
You do not have the required permissions to view the files attached to this post.
-
YorkLuke
- Knows how to turn Lights ON
- Posts: 4
- Joined: October 19th, 2011, 8:53 pm
- I Use FreeStyler for: Nightclub Lighting
Re: Varytec LED Laser 4
okay thanks for this would be very difficult for me but i'll try
would be very difficult for me but i'll try-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Varytec LED Laser 4
Difficult ?
Why?.
Because you don’t know anything about DMX.
Sorry.!
This has nothing to do with DMX.
You just have to fill-in numbers from one table into an other.
I have pin-pointed the numbers.
The only next thing to do will be filling in the numbers. That isn’t difficult.
You sound like my son when he try to avoid working.
Like I say to him, tell me when you run into trouble and I will guide you.
/Jan
Why?.
Because you don’t know anything about DMX.
Sorry.!
This has nothing to do with DMX.
You just have to fill-in numbers from one table into an other.
I have pin-pointed the numbers.
The only next thing to do will be filling in the numbers. That isn’t difficult.
You sound like my son when he try to avoid working.
Like I say to him, tell me when you run into trouble and I will guide you.
/Jan
-
Akaraoke
- Knows how to turn Lights ON
- Posts: 1
- Joined: June 18th, 2015, 6:21 pm
- FreeStyler Version: 3.5.9
- I Use FreeStyler for: DJ
Re: Varytec LED Laser 4
Hello , someone got it set up this equipment ? I was reading and I can not . Can you help me and send the configuration file? thank you
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: January 4th, 2011, 9:57 pm
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Varytec LED Laser 4
Hej Akaraoke
How fare have you come before having trouble with this one.
/Jan
How fare have you come before having trouble with this one.
/Jan