Hello, I am a complete newbie to Freestlyer and DMX lighting. I did a quick search for the Behringer DDM-4000 DJ mixer here in this forum and found nothing. I own this mixer and I would like to use it as external midi controller for Freestyler.
I successful installed Freestyler on the laptop and I am able to control my ADJ Mega Bar 50RC via the KEDSUM® DMX512 USB I purchased from Amazon. The only problem is I cannot get the Behringer DDM-4000 to actually adjust any Freestyler settings via midi.
The DDM-4000 is connect to my Native Instruments Audio8 soundcard via 3 pin midi. The Audio8 is connected to my laptop via USB.
When I do the midi setup it appears Freestyler is receiving midi. I tried to assign a DDM-4000 button to "start sequence 1" and the midi note box shows (144),53. The velocity shows (0) value, and the midi channel displays ch1.
However, after I save the setup. The DDM-4000 will not actually trigger the sequence with the button I assigned.
Please advise. Thanks.
Behringer DDM-4000 [SOLVED]
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: October 30th, 2014, 7:24 pm
- FreeStyler Version: 3.5.7
- I Use FreeStyler for: DJ
- Spirit
- Pro Supporter! (Moderator)
- Posts: 1421
- Joined: July 10th, 2010, 8:55 pm
- FreeStyler Version: 3.5.9
- I Use FreeStyler for: Nightclub Lighting
Re: Behringer DDM-4000
a quick look i see (144) is a NOTE ON / NOTE OFF midi command.
by default freestyler doesnt use these midi command.
but you can enable this. on the midi config page.
there is a "option" on the right top of the midi config there you can enable it.
by default freestyler doesnt use these midi command.
but you can enable this. on the midi config page.
there is a "option" on the right top of the midi config there you can enable it.
AMD FX-6100 (3.6ghz)x6, Nvidia 770GTX 4GB, 8GB Ram,ROG MB, enttec Pro, Open enttec, Velleman, T2250MTS-B1 22"touchscreen, Ilyama 23" screen, scans, dimm, rgbled, laser, soundsystem Just a drive-in show. Live and Dance
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: October 30th, 2014, 7:24 pm
- FreeStyler Version: 3.5.7
- I Use FreeStyler for: DJ
Re: Behringer DDM-4000
YES... Thank you Spirit. It's working now.